产品目录
- BND自研
- 德国FEMTO放大器
- OPHIR激光功率能量计
- 激光光束分析仪
- 德国GTE
- Pacific Lasertec...
- 数据采集AA LAB SYSTE...
- 流量测量AA LAB SYSTE...
- 光纤链路AA LAB SYSTE...
- AA Lab Systems放大...
- HGE
- 博纳德试验指针销
- 插头插座类检测设备
- 灯头灯座类检测设备
- 标准地板防滑系列
- 进口手持型测力计
- 意大利Gabbrielli
- 英国MUNRO风速风向表
- 美国DL放大器
- 陶瓷扭转粘度计
- 高压电源放大器
- DEI脉冲发生器
- 瑞士Zurich Instrum...
- 冷冻负载试验包
- 博纳德试验机设备
- 体育检测仪器
- 美国ED&D试验指
- 德国PTL试验机设备
- 德国PTL试验指针销
- 光纤光谱仪
- 微型称重传感器
- 光学斩波器
- 高集数据采集卡
- 美国SRS放大器
- 德国WAZAU系列
- MONROE静电测试仪
产品详情
简单介绍:
PTL软线柔性试验机通过来回弯折来测试软电线和电缆的机械寿命。
PTL软线柔性试验机机根据IEC60065/2005-12&16.3b)表19,IEC60227-2/2003-04&3.1.2表1图1,IEC60245-2/1998-04 &3.1.2表1图1,VDE0472部分603/1989-07&4.8and&4.12图5等相关标准
详情介绍:
PTL软线柔性试验机
产品名称:PTL软线柔性试验机
产品名称:PTL软线柔性试验机
产品型号:F43.11
产品用途:通过来回弯折来测试软电线和电缆的机械寿命。
符合标准:根据IEC60065/2005-12&16.3b)表19,
IEC60227-2/2003-04&3.1.2表1图1,
IEC60245-2/1998-04 &3.1.2表1图1,
VDE0472部分603/1989-07&4.8and&4.12图5等相关标准
Standard out fit
1 carrier, with recirculating-ball bearing bushes running be-low the table-board on two cylindrical guide ways, with mounted travelling boom,
1 geared motor with chain and connecting rod to drive the carrier with a speed
0.33 m/s ± 5%,
2 supports for the side pulleys,with grooves for the adjust-ment of the pulleys,
1 set of bolts nuts and ball bearings for fastening the pulleys,
1 set of loading weights, de-tails see F 43/3
1 set of restraining clamps as stops to limit the travel of the sample,
1 set of terminals for connec-tion of the samples,
1 base, with one front and two side doors, with splited table-board, with shelf for accessories,
1 protecting hood with panes of polycarbonate glass, disburdened by gas springs, with elec-tric drive to open and to close,
3 door contact switches for the side doors and for the protecting hood,
1 electrical current load unit, details see F 43/3,
1 electrical switching and control unit with main switch, lockable switch EMERGENCY-OFF,preset counter as well as push buttons I and O.
Design: Steel construction, papyrus-white structure varnished with stone grey coloured high-lights, smaller steel parts burnished or nickel-plated, cylindrical guide ways hardened and ground,for operation at 3 x 400 V 50 Hz or 60 Hz
Article No.: F 43.11